Skip to main content

Listed

, home
FREN
Vuntum, humanoid robots

IndustryBrief

Japan's JTEKT says its AI-guided robot picks 97.1% of loose parts, up from 85.0% without AI

At its Tadomisaki plant, JTEKT tested a robot that uses a 3D camera to spot parts dropped loose in a bin and picks them one by one, using an AI trained in simulation. For the trial, the company added a PC dedicated to the AI to its existing equipment, without making major changes.

Published on · 1 min read · 1 sourceWritten with AI · checked against the source

On 2 November, JTEKT announced that it had reached a 97.1% success rate for picking loose parts on an automotive parts line at its Tadomisaki plant, Mynavi News TECH+ reports.

The rate was measured in difficult conditions, chosen to bring out differences in performance. With the robot's conventional control, it was 85.0%. According to the company, the average cycle time also fell by 16%.

The AI works in two stages. First, a fast model spots candidate parts in the 3D camera image. A second, more precise model then calculates the position and orientation of the part to be picked, but it runs only on 1 or 2 candidates.

The trial ran from 19 March to 31 August 2026, as part of an AWS Japan programme, with Upstage AI and Karakuri.

Next, JTEKT says it wants to add this AI to workstations that are already automated. The company is aiming for a higher success rate and zero human intervention.

Source

  1. マイナビニュース TECH+ (ものづくり) · news.mynavi.jp

Also worth reading in Industry

What next

Illustration of the Signal mannequin, not a photo of the robotIllustration, not a photo of the robot
Next storyAgiBot reports 2 billion yuan in first-half humanoid salesBrief ·

English edition adapted from the original French story: figures, links, names and quotes checked by code against it. Our methodCorrections policyReport an error