Gripper
- In French:
- Préhenseur
Definition
An end effector designed to grasp and hold objects. A distinction is made in particular between parallel grippers, whose two jaws close in a straight line, centric and angular grippers, and magnetic or adhesive grippers. The choice depends on the shape, mass and fragility of the objects to be handled.
Checked on against the references below. · Written with AI · checked against the sources Source: SCHUNK, “Parallel gripper” range.
Concrete examples
Each arm of Yuri has seven joints plus a parallel-jaw gripper, which Sensori describes as built for force feedback and bilateral control. HMND 01 Alpha Bipedal uses a modular design: either a 12-DOF five-finger hand or a 1-DOF parallel gripper.
What it changes for you
SCHUNK’s standard parallel grippers handle workpieces from a few grams to 80 kg. The recommended workpiece weights are calculated for force-fit clamping, with a static friction coefficient of 0.1 and a safety factor of 2 against workpiece slippage under gravity alone.
Additional material checked on .