Skip to main content

Listed

, home
FREN

ros2_control

Definition

A ROS 2 software framework for robot control that separates controllers from the hardware interface. One manager loads the controllers, another manages the hardware components, whose description is in the robot’s URDF file. It can also drive a simulated robot through integrations with simulators.

Checked on against the references below. · Written with AI · checked against the sources Source: ros2_control documentation (Jazzy).

Concrete examples

In the software documentation prepared for the RGMC competition, PAL Robotics writes that the whole control stack of TIAGo Pro is based on the ros2_control framework. The default controllers there are joint trajectory controllers for the arms, torso and head, through the position interface.

What it changes for you

The documentation defines three types of hardware components: System for complex multi-DOF hardware, Sensor for sensing, and Actuator for simple 1-DOF hardware such as motors. Mock components mirror commands to their states, so the framework’s whole “piping” can be tested without hardware.

Not to be confused with

ros2_control is the framework, with its controller manager and hardware abstraction. ros2_controllers provides commonly used controllers that are ready to use with many robots, such as the joint trajectory controller or the differential drive controller. The documentation places the framework’s source code in these two GitHub repositories.

Additional material checked on .

Related terms

References

Back to the glossary