Skip to main content

Listed

, home
FREN

Time of flight

In French:
Temps de vol
Abbreviation:
ToF

Definition

A distance-measurement principle that consists of emitting a light signal and measuring the time it takes to return after reflecting off an object. A time-of-flight camera applies this principle to each pixel to produce a depth image. Lidar relies on the same principle with laser pulses.

Checked on against the references below. · Written with AI · checked against the sources Source: Texas Instruments, “Time-of-Flight Camera: An Introduction” (SLOA190B).

Concrete examples

Ecovacs’s page for the GOAT A1600 LiDAR PRO describes navigation built on “a 360° rotating LiDAR, a 3D-ToF LiDAR and an AI camera” (original wording in French). Its spec table lists “3D ToF+AI Camera+Multiline LiDAR” under obstacle avoidance. The page gives no range or resolution for this sensor.

What it changes for you

According to e-con Systems, a time-of-flight module delivers depth data directly, with no matching algorithm to run on the host platform. A PatSnap analysis points to two limits: accuracy drops over very long distances, and several time-of-flight sensors close to one another can interfere.

Not to be confused with

Stereo vision computes depth from variations in the scene’s texture and needs substantial computing power (PatSnap). Time of flight relies on an active light source and performs better in low light (e-con Systems).

Additional material checked on .

Related terms

References

Back to the glossary