PAL Robotics
PAL Robotics is a Spanish robot manufacturer. It builds the humanoids ARI (professional service), KANGAROO, REEM-C and TALOS (research and education). It also makes the mobile manipulators TIAGo and TIAGo Pro, for research and education.
Written with AI · checked against the sources
PAL Robotics (Spain) has 6 robots in the Vuntum database. Every specification on a profile links to its source and to the date it was verified, following our verification method. To set these models against other brands, open the robot comparison tool or the full list of robots.
Official website: https://pal-robotics.com
Robots
- ARIProfessional service · Not disclosed
ARI is a humanoid robot for professional service, made by PAL Robotics. It is 165 cm tall, 53 cm wide and 73 cm deep. It has autonomous navigation and runs on Ubuntu LTS and Real Time OS.
- Claimed
- KangarooResearch and education · Not disclosed
The Kangaroo is a humanoid robot from PAL Robotics, intended for research and education. It is biped and stands 160 cm tall. Its battery has a capacity of 976 Wh and it runs on Ubuntu LTS, ROS 2 LTS and PAL OS.
- Claimed
- REEM-CResearch and education · Not disclosed
REEM-C is a humanoid robot from PAL Robotics, intended for research and education. It is 165 cm tall, weighs 80 kg and has 68 degrees of freedom. It can climb stairs and walks at speeds of up to 2.5 km/h.
- Claimed
- Teleoperable
- TALOSResearch and education · Not disclosed
TALOS is a humanoid robot from PAL Robotics, intended for research and education. It is 175 cm tall, weighs 95 kg and moves on two legs. Its payload is 6 kg per arm, with the arm fully extended.
- Claimed
- TIAGoResearch and education · Not disclosed
TIAGo is a mobile manipulator from PAL Robotics, intended for research and education. It moves on wheels, and its arm has 7 degrees of freedom. The arm payload is 3 kg, without end effector. The Standard version has an Intel i5 CPU, 8 GB of RAM and a 250 GB SSD.
- Claimed
- TIAGo ProResearch and education · Not disclosed
The TIAGo Pro is a mobile manipulator from PAL Robotics, intended for research and education. Its payload is 3 kg (per arm, excluding end-effector). It moves on a wheeled omnidirectional base and carries a LiDAR, a camera and a microphone. It is compatible with ROS 2.
- Claimed