In France, you rent a piloted robot, not an employee
Libella Robotics, a company based in Colombes (Hauts-de-Seine), rents the Unitree G1 for events. Its page, read on November 6, 2026 and updated on September 30, lists “from €1,500 excluding VAT for half a day” for its Presence package, about 2 h 30 of actual robot presence. The price covers piloting by the team, setup and on-site preparation, interaction with the public and transport within the Île-de-France region. The full day (Activation package) and the bespoke experience (Signature) have no listed price: they are quoted on request, with an answer within 24 hours. Rates are described as indicative, the final quote depending on venue, date, transport and technical constraints. It is the only French renter whose price list we could read.
The page itself spells out what you get. The G1 is teleoperated: a member of the team pilots it, the client does not pilot it directly. The robot handles its own balance and steps; the operator decides the route, the timing of gestures and an immediate stop. At least one operator is present from setup to teardown, the robot is never left unattended, and piloting is included in the price, never billed as an option.
As for content, the robot walks, greets guests, poses for photos, performs prepared choreographies and scripted sequences, and can deliver a message written in advance. It does not improvise conversation: according to the page, “what is said is written and validated with you before the event”. It needs a flat, smooth, clear floor; a few square metres are enough for a static presence. It travels by vehicle or train, never by plane because of its lithium batteries. The page recommends booking two to three weeks ahead and says a professional liability certificate can be provided. It says nothing about cancellation terms.
In China, the daily rental price is collapsing
A column by 具身商业前哨 published by TMTPost on October 23, 2026 gives the orders of magnitude: a G1 rented with human service cost 6,000 to 8,000 yuan a day in the second half of 2025, and about 3,000 yuan now. At the November 6, 2026 rate (€1 for 7.4485 yuan), that is roughly €810 to €1,070 then and about €400 now. The article does not name its source for these rates; a renter it interviewed says small companies are cutting prices to win contracts, and that the value is moving to orchestration, tuning and on-site service.
An investigation by Sina Tech’s “BUG” column, reposted by MyDrivers on October 22, goes lower: the daily rental of a basic G1 has fallen below 2,000 yuan (under €270), that of a robot dog below 500 yuan. For renters, National Day, once a small peak season, was very bleak this year, and a single client can be fought over by more than a dozen companies. The Qingtianzu platform, launched in late 2025 by AgiBot and Feikuo Technology, offers two-hour trials for 1 yuan in ten cities. MyDrivers adds that the G1, launched in May 2024, had its selling price cut in 2026, and that humanoid prices in general can fall by more than half before renters have paid off their machines.
These figures are press estimates, not published price lists: durations, versions and included services are not always stated, and the TMTPost column also quotes rates for another Unitree model, the U2, rented with technicians, which should not be confused with those of the G1. Even with that caveat, the gap with France is clear: €1,500 excluding VAT for half a day of presence on one side, under €270 to about €400 for a full day on the other.
In San Francisco, $30 an hour
The start-up Tau Robotics sends modified, remotely guided G1s to clean homes and offices in San Francisco. According to MarketWatch (reporting by Christine Ji), which Humanoid.guide picked up on October 17, 2026, it charges $30 an hour per robot, about €27, and $60 (about €54) for a pair. Tau runs eight robots and has billed about 160 robot hours across nearly 100 cleanings. The journalist’s session was free.
At her home, two robots mopped, vacuumed, wiped surfaces and dusted, work she judged thorough. Operators guided them from the company’s headquarters through cameras in the head and wrists. Folding remains slow: about four minutes for a towel, a little over a minute for jeans. One robot struggled to grip a smooth glass before taking it by the rim. One of Tau’s founding engineers finds the five-finger hands available too fragile and too hard to repair for its use.
The service has a price in data. Cleaning requires live video access; the customer can ask for their data to be deleted afterwards, otherwise the unblurred footage is kept indefinitely to train Tau’s models. Rooms can be excluded (the journalist excluded her bedroom and bathroom). Tau plans to expand beyond San Francisco in the coming years; we found no equivalent offer in France.
A human stays behind the robot
At Libella, an operator pilots the robot from start to finish. At Tau, operators guide each robot remotely. In China, TMTPost specifies that the G1 rate includes a human service, without saying what it consists of; MyDrivers does not say what its price includes. In Colombes as in San Francisco, what you pay for is therefore a robot and the team that makes it work, not the machine alone. To tell what is autonomous from what is teleoperated in a demonstration, our guide “Autonomous or teleoperated: how to read a humanoid robotA robot whose form follows that of the human body, with a torso, two arms, a head and most often two legs.Read the glossary entry demo” lists the clues.
Buy rather than rent?
Unitree lists the G1 from $13.5K, before tax and shipping, about €12,100, with an eight-month warranty (eighteen months for the EDU version, sold on contact). The other prices we read diverge. NeozOne (page updated April 21, 2026) cites about €12,500 excluding VAT in Europe, an estimate by the author with no source. Robotics Center, whose listed addresses are in the United States, lists $21,500 (about €19,300) before tax and shipping, marked as restocking on November 6, with no shipping estimate for Europe. Futura Sciences (May 25, 2026) reports that Instadrone, a drone company in Béziers, can sell the G1 with local support and training, and puts its price generally under €16,000. The same article claims Unitree robots send an encrypted data stream to servers in China, which we have not verified.
Our calculation: at Unitree’s listed price, buying amounts to a little over eight half-days of Libella’s Presence package (€12,091 divided by €1,500). The comparison stops there, because buying includes no operator, no training, no insurance and no preparation of sequences. Unitree also warns on its page that some functions shown as examples are still being developed and advises individual buyers to understand the limits of humanoids before buying, the industry being at an early stage.
And for the home?
Nothing above looks like a household-chores offer in France: the French offer we read sells presence and show. The product designed for the home is elsewhere. 1X offers NEO at $20,000 (about €17,900) in its “Early Access” purchase offer, three-year warranty included, or $499 a month (about €447) by subscription, with a “Scheduled Expert Mode” in which a 1X expert can supervise the robot remotely at scheduled times. Its order page, read on November 6, 2026, says deliveries in the United States start in 2026 and mentions neither France nor Europe.
Five questions before booking
Who pilots, and what is the robot really autonomous at? How long is the robot actually present, compared with the duration billed? Is what it says and does written in advance? Is the price excluding VAT, and are the operator, transport and insurance included? What lead times and cancellation terms apply? At Libella the page answers the first three and partly the fourth (price excluding VAT, piloting and transport within Île-de-France included, insurance certificate on request); it advises booking two to three weeks ahead but publishes no cancellation terms.
What we do not know
We have no comparable price list: one French renter read, Chinese estimates with varying durations and services, a dollar rate limited to one American city. Rental prices are indicative and may change; those in this guide are the ones on the pages read on November 6, 2026. Conversions use the rate of the day, rounded.
Sources
- Libella Robotics, humanoid robot rental page, updated September 30, 2026, read on November 6, 2026 · robotics.libella.io
- TMTPost, column by 具身商业前哨 of October 23, 2026 on falling humanoid rental prices, read on November 6, 2026 · tmtpost.com
- MyDrivers, October 22, 2026 repost of a Sina Tech investigation into robot rental, read on November 6, 2026 · news.mydrivers.com
- Humanoid.guide, article of October 17, 2026 on Tau Robotics (after MarketWatch), read on November 6, 2026 · humanoid.guide
- Unitree, G1 page (price, specifications, warranty), read on November 6, 2026 · unitree.com
- NeozOne, article on the G1 at CES 2026, updated April 21, 2026, read on November 6, 2026 · neozone.org
- Robotics Center, G1 page (price in dollars), read on November 6, 2026 · roboticscenter.ai
- Futura Sciences, article of May 25, 2026 on Instadrone’s G1 in Béziers, read on November 6, 2026 · futura-sciences.com
- 1X, NEO order page, read on November 6, 2026 · 1x.tech
- Frankfurter, euro rates against the yuan and the dollar on November 6, 2026 · api.frankfurter.dev
Also worth reading
Illustration, not a photo of the robot