Skip to main content

Listed

, home
FREN

Inertial measurement unit

In French:
Centrale inertielle
Abbreviation:
IMU

Definition

A sensor that combines accelerometers and gyroscopes, sometimes magnetometers, to measure an object’s accelerations and rotation rates along several axes. By integrating these measurements one estimates orientation and movement, but small errors accumulate and the estimate drifts over time. It is therefore combined with other sensors, such as wheel encoders.

Checked on against the references below. · Written with AI · checked against the sources Source: VectorNav, Inertial Navigation Primer, “Theory of Operation: Inertial Sensors”.

Concrete examples

Ridgeback ships with an integrated IMU alongside its front laser scanner (a second one, at the rear, is optional). Microduck lists two in its specifications. On Stretch 4, Hello Robot’s navigation repository launches the IMU together with GLIM, a “lidar-inertial” odometry.

What it changes for you

In its current documentation, the ROS package robot_localization assumes an ENU frame (east, north, up) for all IMU data and does not work with NED frame data (north, east, down), in which most IMUs natively report their orientation data: the data must be converted to ENU before being passed to it.

Not to be confused with

An IMU provides the measurements of its sensors (gyroscopes, accelerometers, sometimes a magnetometer), with no navigation output. An AHRS (attitude and heading reference system) includes a magnetometer and outputs attitude (orientation); an inertial navigation system (INS) outputs position, velocity and attitude. VectorNav notes that these terms are often used interchangeably.

Additional material checked on .

Related terms

References

Back to the glossary