Series elastic actuator
- In French:
- Actionneur élastique en série
- Abbreviation:
- SEA
Definition
An actuator in which a spring is deliberately placed between the motor and the load. The deformation of the spring makes it possible to measure the force being transmitted and to regulate it more finely, and it absorbs shocks. This compliance makes contact with the environment or with a person less abrupt than with a rigid transmission.
Checked on against the references below. · Written with AI · checked against the sources Source: Pratt and Williamson, “Series Elastic Actuators”, IROS 1995 (copy hosted by MIT).
Concrete examples
On NASA’s humanoid Valkyrie, the upper arm, torso, pelvis and leg joints are rotary series elastic actuators, and the ankle relies on two linear actuators of the same type. TIAGo Pro also has them in its arms: PAL Robotics attributes to their inherent compliance a reduction in the risks of interacting with people.
What it changes for you
On the arms of TIAGo Pro, joint torque is estimated from the deflection of the elastic element. That measurement suffers from a position-dependent error called “fingerprint”, which can be compensated once estimated.
Not to be confused with
A rigid actuator is built “as stiff as possible” to increase bandwidth. The elastic element of a series elastic actuator limits that bandwidth but lowers the output impedance. The spring must still carry the load without being too stiff, otherwise system impedance goes back up.
Additional material checked on .