Skip to main content

Listed

, home
FREN

Gear reducer (gearbox)

In French:
Réducteur

Definition

A transmission placed between a motor and the load, which lowers the rotation speed and multiplies the torque in the same ratio, losses aside. An electric motor of suitable power generally turns too fast to drive a joint directly, which has to move slowly with a lot of force. In return, the gearbox adds friction and often backlash.

Checked on against the references below. · Written with AI · checked against the sources Source: Lynch and Park, Modern Robotics, § 8.9 Actuation, Gearing, and Friction (Northwestern University).

Concrete examples

According to an estimate cited by Humanoid.guide, Optimus uses something on the order of 14 strain-wave reducers in its rotary joints, while Unitree builds its own low-ratio planetary actuators for the G1. The Humanoid.guide listing for StarBot Astra gives “Planetary reducers” as its gear technology.

What it changes for you

In a strain-wave (harmonic) reducer, the high ratio and the flexspline’s friction make the joint nearly impossible to back-drive: builders then add a joint torque sensor, roughly 30 percent of a rotary actuator’s cost in HONPINE’s breakdown. In quasi-direct drive, a 5:1 to 20:1 planetary stage lets the joint be pushed from the outside, but the motor then has to be big and heavy.

Additional material checked on .

Related terms

References

Back to the glossary