Skip to main content
, home
FREN
W1, official visual
© Photo : Zeroth · official image · original page

HumanoidsBrief

Inovance launches liquid-cooled wheeled humanoid that can work 24 hours without a break

China's Inovance has put a wheeled humanoid robot on the market, aimed according to the company at makers of high-quality finished products, Korean site Robot Newspaper reports.

Published on · 1 min read · 1 source

The liquid cooling circuit is built into the onboard Thor chip. According to Robot Newspaper, it lets the robot run at full power for long periods above 40 °C and deliver 2,070 TOPS of computing without the limits of air cooling.

Centralised heat dissipation gives it an IP54 rating against dust, water splashes and oil spray. Smaller fans keep noise below 60 dB, making work quieter alongside operators.

The end effector is modular: a gripper, robotic hand, pneumatic gripper or suction cup can be swapped depending on the workstation.

The robot lasts up to 10 hours on one charge. Two hot-swappable battery modules allow it to run for 24 hours without interruption.

Source

  1. 로봇신문 Robot Newspaper · irobotnews.com

Also worth reading in Humanoids

Next storyKendama: Unitree's G1 humanoid logs about 4,000 catches per hand in an hour, according to Imacreate

Brief written with AI assistance from the source cited, every sentence checked automatically against it. English edition adapted from the original French story: figures, links, names and quotes checked by code against it. Our methodCorrections policyReport an error