Skip to main content

Listed

, home
FREN

Robots / Humanoid / RP1

RP1, official RoboParty visual
© RoboParty · official image · original page

Humanoid · Research and development

RP1

Price not disclosed

Status: Announced only · Proof: statements only. Vuntum has not yet recorded any proof of a demonstration or a sale. See the rule

Use cases: Education and programming · Research and development

Setting: School and laboratory · For: Research and education

by RoboParty · 5 versions: RP1, Pro, RP1开源版, standard and RP1 开源版PRO

Key facts

The RP1 is a A robot whose form follows that of the human body, with a torso, two arms, a head and most often two legs.Read the glossary entry from RoboParty, intended for research and education. It weighs about 39 kg, with 3 h of battery life, which varies with load and terrain. It carries a 3 kg The maximum mass a robot arm can carry at its wrist.Read the glossary entry and its battery can be hot-swapped.

Height
1.35 m (Pro: 1.35 m · RP1开源版: 1.35 m · standard: 1.3 m · RP1 开源版PRO: 1.35 m)
Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 21 October 2026. Original text: “身高1.35 m主动自由度”

Version RP1.

Weight
≈ 39 kg (RP1开源版: ≈ 39 kg · RP1 开源版PRO: ≈ 41 kg)
Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 21 October 2026. RP1, Including end effector and battery. Original text: “体重约 39 kg含末端执行器和电池”

Version RP1. Including end effector and battery.

Battery runtime
3 h
Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 21 October 2026. Varies with payload, terrain, battery state and software configuration. Original text: “10Ah 大容量电池带来 3 小时续航”

Varies with payload, terrain, battery state and software configuration.

Payload
3 kg
Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 21 October 2026. Original text: “负载3 kg3 kg”

Not disclosed: price, availability in France

Overview

RP1 is a humanoid robot from RoboParty, designed for research and teaching. According to ロボスタ Robotstart and 로봇신문 Robot Newspaper, it walks on two legs.

According to the manufacturer, RP1 stands 135 cm tall and weighs about 39 kg, battery and end effectors included. Its payload is 3 kg. Its top running speed is 4 m/s at most. The stated battery life is 3 h, a figure that varies with load, terrain, battery condition and software configuration. Charging takes 1.5 h, and the battery is hot-swappable.

On the software side, the manufacturer says the SDK code is open and the robot is compatible with ROS 2.

RP1 has a stated battery life of 3 h, compared with about 2 h for the Unitree G1. On weight, RP1 comes in at about 39 kg and the G1 at about 35 kg. A comparison of RP1 and Unitree G1 is also available.

Specifications

13 verified specifications · updated on · Written with AI · checked against the sources

RP1, specifications and levels of evidence
SpecificationRP1ProRP1开源版standardRP1 开源版PROLevel of evidence
HeightRP11.35 m (disputed value: 1.3 m according to Humanoid.guide)Pro1.35 m (disputed value: 1.3 m according to Humanoid.guide)RP1开源版1.35 m (disputed value: 1.3 m according to Humanoid.guide)standard1.3 mRP1 开源版PRO1.35 m (disputed value: 1.3 m according to Humanoid.guide)Reported · Humanoid.guideReported. Humanoid.guide, published 2 November 2026. standard, approximately. Original text: “the standard RP1 stands approximately 1.3 meters tall and has 24 actuated degrees of freedom”Reported · PR NewswireReported. PR Newswire (consumer electronics), published 15 October 2026. standard, Approx.. Original text: “The standard RP1 stands approximately 1.3 meters tall and features 24 actuated degrees of freedom (DoF), supporting research into gait, balance control and sim…”Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 21 October 2026. Original text: “身高1.35 m主动自由度”
Width45 cmOriginal text: “450 mm”Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 6 November 2026. Original text: “1350 × 450 × 200 mm身高 × 体宽 × 身厚”
Depth20 cmOriginal text: “200 mm”Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 6 November 2026. Original text: “1350 × 450 × 200 mm身高 × 体宽 × 身厚”
WeightRP1≈ 39 kgOriginal text: “约 39 kg”ProNot disclosedRP1开源版≈ 39 kgOriginal text: “约 39 kg”standardNot disclosedRP1 开源版PRO≈ 41 kgOriginal text: “约 41 kg”Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 21 October 2026. RP1, Including end effector and battery. Original text: “体重约 39 kg含末端执行器和电池”
Battery runtime3 hOriginal text: “3 小时”Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 21 October 2026. Varies with payload, terrain, battery state and software configuration. Original text: “10Ah 大容量电池带来 3 小时续航”
Charge time1 h 30Original text: “1.5 h”Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 21 October 2026. Original text: “充电时间1.5 h1.5 h”
Hot-swappable batteryYesOriginal text: “支持热插拔,无需关机”Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 21 October 2026. Original text: “电池更换支持热插拔,无需关机”
Maximum speed14.4 km/hOriginal text: “≤4 m/s”Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 21 October 2026. While running, maximum speed ≤4 m/s. Original text: “跑步状态下速度 ≤4 m/s”
Locomotion typeBipedReported · Humanoid.guideReported. Humanoid.guide, published 8 November 2026. Original text: “RP1 is a bipedal humanoid from Shanghai RoboParty Technology Co., Ltd.”Reported · PR NewswireReported. PR Newswire (consumer electronics), published 15 October 2026. Original text: “RP1's modular structure and open control interfaces allow research teams to adapt the platform to their experimental needs. Teams can begin with bipedal locomo…”Reported · 로봇신문 Robot NewspaperReported. 로봇신문 Robot Newspaper, published 5 October 2026. Original text: “RP1은 연구자, 교육자, 로봇 개발자, 체화 AI(Embodied AI) 연구팀 등을 겨냥한 2족 보행 휴머노이드로, 로보파티가 올해 1월 공개한 완전 오픈소스 휴머노이드 프로젝트 ‘RPO(ROBOTO ORIGIN)’를 기반으로 개발됐다.”
Degrees of freedomRP1Not disclosedPro30RP1开源版24standard24RP1 开源版PRO30Reported · Humanoid.guideReported. Humanoid.guide, published 2 November 2026. Pro, Excluding dexterous hands. Original text: “The Pro version has 30 actuated degrees of freedom, including a neck with two degrees of freedom and two arms with seven each.”Reported · PR NewswireReported. PR Newswire (consumer electronics), published 16 October 2026. Pro, active degrees of freedom, excluding manual dexterity. Original text: “Le RP1 Pro possède 30 degrés de liberté actifs”Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 28 October 2026. RP1开源版. Original text: “主动自由度24/30续航时间3 h”
Degrees of freedom per armRP1Not disclosedPro7Original text: “two 7-DoF arms”RP1开源版Not disclosedstandardNot disclosedRP1 开源版PRONot disclosedReported · PR NewswireReported. PR Newswire (consumer electronics), published 15 October 2026. Pro, Actuated degrees of freedom per arm; dexterous hands excluded.. Original text: “The standard RP1 stands approximately 1.3 meters tall and features 24 actuated degrees of freedom (DoF), supporting research into gait, balance control and sim…”
Payload3 kgClaimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 21 October 2026. Original text: “负载3 kg3 kg”
Teleoperation supportedYes, VR teleoperationOriginal text: “VR teleoperation”Reported · Humanoid.guideReported. Humanoid.guide, published 2 November 2026. Original text: “The software offering includes VR teleoperation, data collection and playback, and motion retargeting.”Reported · PR NewswireReported. PR Newswire (consumer electronics), published 15 October 2026. Teleoperation using VR or motion-capture devices.. Original text: “For Whole Body Intelligence development, RP1 provides a robot body capable of dynamic motion, whole-body control (WBC), and supporting tools for virtual realit…”

Do you have a source? Tell us

Claimed by the manufacturerReported by a news outletIndependent test observed or measuredNo: confirmed absence · Not disclosed: no source

Program this robot

Verified on

Programmable: yes (ROS 2).

Accessible from the advanced level. To start: ROS.

SDK and languages

Open-source SDK
Yes Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 21 October 2026. Original text: “全栈开源不止软件,硬件也开源”

ROS 2

ROS compatibility
ROS 2 Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 21 October 2026. Original text: “ROS 2 中间件”ROS 2 Reported · Humanoid.guideReported. Humanoid.guide, published 8 November 2026. Original text: “RP1 is a bipedal humanoid from Shanghai RoboParty Technology Co., Ltd., designed as an open, modifiable platform for robotics research, education, and embodied…”

App and voice control

Official mobile app
Yes Claimed by the manufacturerClaimed by the manufacturer. RoboParty (official product pages), accessed 28 October 2026. Original text: “控制方式遥控、APP遥控、APP、语音控制”

The robot on video

RP1 Official Launch | RoboParty’s Fully Open-Source Humanoid Robotics PlatformPresentation video of the RP1 robot (RoboParty, 14 October 2026) · Watch on YouTube
RoboParty at IROS 2026: RP1’s First Global Dynamic ShowcasePresentation video of the RP1 robot (RoboParty, 14 October 2026) · Watch on YouTube

This video has no subtitles.

Proof log

The dated events Vuntum found for this robot, newest first, each with its source. A line appears only if its date and its source page are known.

7 proofs: 7 from independent sources, 0 from the maker, 0 from other sources.

  1. , Reported by an independent source: 2 values on the profile

    Independent source. Source: Humanoid.guide

  2. , Reported by an independent source: 4 values on the profile

    Independent source. Source: Humanoid.guide

  3. , Reported by an independent source: 2 values on the profile

    Independent source. Source: PR Newswire (électronique grand public)

  4. , Reported by an independent source: 6 values on the profile

    Independent source. Source: PR Newswire (électronique grand public)

  5. , Reported by an independent source: 1 value on the profile

    Independent source. Source: Humanoid.guide

  6. , Reported by an independent source: 1 value on the profile

    Independent source. Source: ロボスタ Robotstart

  7. , Reported by an independent source: 1 value on the profile

    Independent source. Source: 로봇신문 Robot Newspaper

News about this robot

All news

Comparable robots

See every robot in this category
4NE1 Mini

4NE1 Mini

NEURA Robotics · Humanoid

Education and programming · Research and development

Price not disclosed

ClaimedAnnounced onlyTeleoperable
AGIBOT X2

AGIBOT X2

AGIBOT · Humanoid

Education and programming · Research and development

Price not disclosed

ClaimedAnnounced only
AI Sapiens K1

AI Sapiens K1

ROBOTIS · Humanoid

Education and programming · Research and development

Price not disclosed

ClaimedAnnounced only
ARTEMIS

ARTEMIS

Robotics and Mechanisms Laboratory (RoMeLa) · Humanoid

Education and programming · Research and development

Price not disclosed

ClaimedAnnounced onlyBasic profile
Cite this profile

Plain citation

“RP1”, Vuntum, updated 8 November 2026, https://vuntum.com/en/robots/roboparty-rp1

APA format

Vuntum. (2026, November 8). RP1. https://vuntum.com/en/robots/roboparty-rp1

Embed this badge

Vuntum profile: RP1

To show on your site how many sourced values this profile holds, linking back to it.

HTML code

<a href="https://vuntum.com/en/robots/roboparty-rp1"><img src="https://vuntum.com/badge/roboparty-rp1.svg?lang=en" alt="Vuntum profile: RP1" height="20"></a>

Shields.io address (README, other styles)

https://img.shields.io/endpoint?url=https%3A%2F%2Fvuntum.com%2Fapi%2Fv1%2Frobots%2Froboparty-rp1%2Fbadge%3Flang%3Den